Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

HK 9RS 04 BG1

Gear flow divider, group 1 9RS 4-way
Design
with central phase compensation valve 
external leak oil discharge 
adjustment range DBV: 70 - 210 bar 
Pressure difference
max. 30 bar (between the sections) 
Construction type
4 sections 
PDF-faili allalaadimine

Omadused

Design
  • with central phase compensation valve 
  • external leak oil discharge 
  • adjustment range DBV: 70 - 210 bar 
Pressure difference
  • max. 30 bar (between the sections) 
Construction type
  • 4 sections 
Size
  • group 1 

Tootekirjeldus

Märkused
Before commissioning the system, the first running-in of the gear flow divider should be under no load.
Diagrams and circuit diagrams essentially valid as schematic diagrams also for 4-way flow dividers.
Kirjeldus
This flow divider is used to supply four independent hydraulic circuits with just one pump.
Division error approx. 3 %.
Equal pressure setting for all sections.
Valves adjustable from 70 - 210 bar, other setting ranges on request.
Modification to internal leak oil discharge possible - for this, close off port T with G1/2″ blind plug (modification recommended only after consultation!).
Configuration of gear flow dividers: qi = Q/z * 1000/n.
Qi = displacement/section [cm³].
Q = total input volume flow [l/min].
Z = number of sections.
N = rotating speed [rpm].
Lisateave
Recommended speed: 1800 - 2000 rpm

Product variants

5 Results
Mõõtmejoonis
Nimetus
p1 max. (bar)
p2 max. (bar)
Flow per element min. (l/min)
Flow per element rec'd (l/min)
Üksikasjad / items
220 bar
270 bar
2 l/min
4 l/min
Lisateave
220 bar
270 bar
2.5 l/min
5 l/min
Lisateave
220 bar
270 bar
3 l/min
6 l/min
Lisateave
220 bar
270 bar
3.5 l/min
7 l/min
Lisateave
200 bar
240 bar
4.5 l/min
8 l/min
Lisateave
p1 = max. working pressure
p2 = max. peak pressure

Column selection

p1 max. (bar)
p2 max. (bar)
Flow per element min. (l/min)
Flow per element rec'd (l/min)
Flow per element max. (l/min)
Input volume per section (cm³)
A (mm)
Li (mm)
p1 = max. working pressure
p2 = max. peak pressure