Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

NYZ 800

Thermoplastic hose, single-layer, ISO 3949/R8-1, aramid braid, twin hose
Inner tube
polyester elastomer 
Reinforcement
one aramid braid 
Cover
polyurethane (PUR) 
pricked 
PDF-faili allalaadimine

Palun valige versioon

Kuva artiklitabel

Omadused

Inner tube
  • polyester elastomer 
Reinforcement
  • one aramid braid 
Cover
  • polyurethane (PUR) 
  • pricked 
Application
  • high pressure circuits 
  • general application 
Colour
  • black 
Elongation
  • + 3 % to - 3 % 
Media
  • mineral oil 
  • applications with gaseous or chemical media 
  • synthetic oils 
  • water (0 °C to +60 °C) 
  • water-oil-emulsions (up to +60 °C) 
Special features
  • high ozone and abrasion resistance 
  • no swelling or brittleness when used with solvents or alkaline media 
  • twin hose 
  • very good reverse bending fatigue strength 
  • slight volumetric expansion 
Standard
  • ISO 3949 / R8-1 
Temp. max.
  • 93 °C
Temp. min.
  • -40 °C
Customs tariff number
  • 39173100 
Kõik omadused

Tootekirjeldus

Märkused
The change in length of the hose is determined at max. working pressure during testing according to EN ISO 1402

Product variants

5 Results
Mõõtmejoonis
Nimetus
DN*
Inch
Size
Inside Ø (mm)
3/16″ 
5 mm
Lisateave
1/4″ 
6.5 mm
Lisateave
5/16″ 
8.1 mm
Lisateave
10 
3/8″ 
9.7 mm
Lisateave
12 
1/2″ 
13 mm
Lisateave
DN = nominal diameter, nominal width

Column selection

DN*
Inch
Size
Inside Ø (mm)
Outside Ø (mm)
Working pressure (bar)
Burst pressure (bar)
Bend radius min. (mm)
DN = nominal diameter, nominal width