Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

HK HT 04 50 0500

Hydraulic cylinder sa. w/o. F. 50-500
Detailne teave toote kohta

HK HT 04 50 0500

Ø S
50 mm
Z
650 mm
Ход
500 mm
подходящий комплект уплотнений
HK GKG T 050 060
C
50 mm
L1
30 mm
T
565 mm
Ø D
70 mm
E
G 3/8″ -19
Kõik omadused

Omadused

Рабочее давление
  • макс. 200 бар (согласно DIN EN 982) 
Исполнение
  • плунжерный цилиндр 
  • без крепежных элементов 
Материал
  • Днище цилиндра: сталь FE 510-A105 
  • Патрубок подачи масла: сталь 9SMn28 
  • Гайка: сталь 8UNI EN 20898-2 
Поршневой шток
  • Поршневой шток: сталь 20MnV6 хром 25 микрон ± 5 
  • Поршневой шток: коррозионная стойкость до 120 часов тестирования в NSS поISO 3768 
  • Направляющая поршневого штока: сталь 9SMn28 
Поршни
  • Поршни: сталь 9SMn28 
Уплотнение
  • Уплотнение TPM всеобщее обслуживание оборудования: NBR нитрильный каучук 
  • Кольцевое уплотнение OR: NBR нитрильный каучук Fluorosil Viton 
  • Уплотнение TSE-TTS-TTI/L: NBR нитрильный каучук + ткань / полиуретан 
  • Уплотнение GHM-GHK: NBR нитрильный каучук / полиуретан 
Область температур
  • Стандартное исполнение от -15 °C до +80 °C 
Kõik omadused

Tootekirjeldus

Märkused
Piston speed based on standard seals: Max. 25 m/min - 0.42 m/sec.
Piston speed to the end positions: max. 6 m/min - 0.10 m/sec.
For these standard cylinders, it is recommended not to weld any fastenings to the cylinder liner (e.g. cardanic mountings) as this could distort it.
Kirjeldus
Please observe the stipulations of EN ISO 4413 (2011) »safety requirements for fluid power systems and their components« as well as specifications and safety requirements based on statutory regulations when selecting, installing and operating the cylinders.
Our hydraulic cylinders and their components are designed for standard applications in industry and agriculture. They can only be used to a limited extent for applications in construction machinery. In these cases, please consult our technical staff. The cylinders correspond to the technical specifications in the catalogue or are designed according to customer requirements (release designation).
Lisateave
Test pressure max. 240 bar (acc. to DIN EN 982)

Product variants

15 Results
Mõõtmejoonis
Nimetus
Ø S (mm)
Stroke (mm)
Suitable seal kit
Z (mm)
30 mm
200 mm
HK GKG T 030 040 
326 mm
Lisateave
30 mm
250 mm
HK GKG T 030 040 
376 mm
Lisateave
30 mm
300 mm
HK GKG T 030 040 
426 mm
Lisateave
30 mm
350 mm
HK GKG T 030 040 
476 mm
Lisateave
30 mm
400 mm
HK GKG T 030 040 
526 mm
Lisateave
30 mm
500 mm
HK GKG T 030 040 
626 mm
Lisateave
40 mm
200 mm
HK GKG T 040 050 
338 mm
Lisateave
40 mm
300 mm
HK GKG T 040 050 
438 mm
Lisateave
40 mm
400 mm
HK GKG T 040 050 
538 mm
Lisateave
40 mm
500 mm
HK GKG T 040 050 
638 mm
Lisateave
Ø S = piston rod diameter

Shows 10 of 15

Column selection

Ø S (mm)
Stroke (mm)
Suitable seal kit
Z (mm)
C (mm)
L1 (mm)
T (mm)
Ø D (mm)
E
Ø S = piston rod diameter