Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Unustasite oma parooli?

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega
Registreerige nüüd

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

KTF 310

PTFE-Hose, smooth DN10, 3 braid, ST
KTF310

The product image may differ

KTF310
KTF310 KTF310
Inside Ø
10 mm
Outside Ø
15.7 mm
Bend radius min.
110 mm
PDF-faili allalaadimine

Palun valige versioon

Kuva artiklitabel

Artikkel

KTF 306 KTF 308 KTF 310 KTF 313 KTF 316 KTF 320 KTF 325 KTF 332
Detailne teave toote kohta

KTF 310

Inside Ø
10 mm
Outside Ø
15.7 mm
Bend radius min.
110 mm
Burst pressure
1,900 bar
Test pressure
712.5 bar
Weight per m
0.442 kg
Working pressure 20 °C (stat.)
475 bar
Kõik omadused

Omadused

Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Features
  • smooth inner liner 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Hose material
  • PTFE (Polytetrafluoroethylene) 
Kõik omadused

Tootekirjeldus

Märkused
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Tellimisinfo
Other designs available on request

Product variants

8 Results
Search
Mõõtmejoonis
Nimetus
Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
KTF 306
6.2 mm
11.2 mm
60 mm
2,000 bar
Lisateave
KTF 308
8 mm
13.4 mm
85 mm
1,900 bar
Lisateave
KTF 310
10 mm
15.7 mm
110 mm
1,900 bar
Lisateave
KTF 313
12.2 mm
18.8 mm
150 mm
1,800 bar
Lisateave
KTF 316
15.1 mm
21.6 mm
175 mm
1,600 bar
Lisateave
KTF 320
20.2 mm
27.8 mm
200 mm
1,200 bar
Lisateave
KTF 325
24.2 mm
31.7 mm
240 mm
1,100 bar
Lisateave
KTF 332
31.9 mm
39.3 mm
280 mm
1,000 bar
Lisateave

Column selection

Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)