Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Unustasite oma parooli?

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega
Registreerige nüüd

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

HK FI AD 0050 MV N AF

Adsorberfilter bis 50l-Tank MW m. V.
HKFIAD0050MVNAF

The product image may differ

HKFIAD0050MVNAF
HKFIAD0050MVNAF HKFIAD0050MVNAF
Max. water absorption capacity
0,12 l
Paagi suurusele
0 to 50 litres 
Õhukogus
5 m³/h
PDF-faili allalaadimine

Palun valige versioon

Kuva artiklitabel

Artikkel

HK FI AD 0050 MV N AF HK FI AD 0100 MV N AF HK FI AD 0400 MV N AF HK FI AD 0800 MV N AF HK FI AD 1800 MV N AF HK FI AD 3600 MV N AF HK FI AD 5400 MV N AF
Detailne teave toote kohta

HK FI AD 0050 MV N AF

Max. water absorption capacity
0,12 l
Paagi suurusele
0 to 50 litres
Õhukogus
5 m³/h
Silica gel fill quantity
0,3 kg
Asendusmahuti
HK FI AD ETS 0050
A
217 mm
B
90 mm
C
121 mm
G
G 1″ -11
Kõik omadused

Omadused

Paigaldusasend
  • vertikaalne 
Rakendamine
  • Reusable with activated carbon filter and valve base 
  • Integreeritud filtrielement 3 μm 
Temperatuur min.
  • −40 °C
Temperatuur max.
  • 80 °C
Materjal
  • Housing: PA6, PC, AL 
  • seal: FKM (FPM) 
Ühendus
  • BSP-väliskeere, silindriline 
Connection position
  • at bottom 
Customs tariff number
  • 84213925 
Kõik omadused

Tootekirjeldus

Märkused
After saturation, the adsorber filter can be opened and refilled.
The spare parts HK FI AD ETS and the desiccant HK FI AD SK can be found under accessories.
Other variants with housing made of aluminum and stainless steel and for aggressive media are available on request.
Design bases are medium, air flow rate or clunk pick-up volume.
Kirjeldus
The adsorber filters in the HK FI AD MV NAF series are aeration dryers with a reusable cartridge and a valve base.
They are suitable for indoor, outdoor and offshore use on hydraulic units, gearboxes, storage tanks and mobile machines.
The plastic housing is filled with HANSA-FLEX Xdry. The desiccant mixture ensures effective drying of the supply air.
A 3 µm filter additionally cleans the air drawn in.
A layer of activated carbon adsorbs the oil mist that escapes with the air.
If the adsorber filter is saturated, both the desiccant and, if necessary, all other internal components can be replaced inexpensively.
The sturdy frost-proof valve section protects the adsorber from unnecessary loading, enables use under extreme, dusty environmental conditions and ensures minimal pressure build-up even at high air flows.
Lisateave
In the adsorber filter, the water molecules contained in the air are bound in the pores of the adsorbent (HANSA-FLEX Xdry). Saturation (loading) and the need to replace the filter cartridge is indicated by a colour change from orange to green.
HANSA-FLEX Xdry consists of silicon oxide and zeolite and is classified as a synthetic, polar and hydrophilic drying agent. Due to its high porosity, it has a large inner surface area. This enables a very high water absorption capacity.
HANSA-FLEX Xdry with a colour indicator is used in the adsorber filters. Colour changes indicate the water content and thus the progress of the loading of the desiccant.
The mixture of silicon oxide and zeolite is not classified as a hazardous substance according to European Union legislation (Regulation EC number 1272/2008). It is not subject to labelling according to the EC Directive (67/548/EEC or 1999/45/EC). It is not classified as a substance hazardous to health or the environment.
Tellimisinfo
For mounting on the tank, the KH FI AD FS FILL filling flange is required.

Product variants

7 Results
Search
Mõõtmejoonis
Nimetus
Max. water absorption capacity (l)
Paagi suurusele
Õhukogus (m³/h)
Silica gel fill quantity (kg)
Üksikasjad / items
HK FI AD 0050 MV N AF
0,12 l
0 to 50 litres 
5 m³/h
0,3 
Lisateave
HK FI AD 0100 MV N AF
0,2 l
50 to 100 litres 
10 m³/h
0,5 
Lisateave
HK FI AD 0400 MV N AF
0,32 l
100 to 400 litres 
20 m³/h
0,75 
Lisateave
HK FI AD 0800 MV N AF
0,56 l
400 to 800 litres 
40 m³/h
1,3 
Lisateave
HK FI AD 1800 MV N AF
0,88 l
800 to 1800 litres 
100 m³/h
2 
Lisateave
HK FI AD 3600 MV N AF
1,32 l
1800–3600 l 
180 m³/h
3,15 
Lisateave
HK FI AD 5400 MV N AF
1,84 l
3600 to 5400 litres 
260 m³/h
4,3 
Lisateave
Õhuhulk: soovituslik õhuhulk võimalikult tõhusaks kuivatamiseks

Column selection

Max. water absorption capacity (l)
Paagi suurusele
Õhukogus (m³/h)
Silica gel fill quantity (kg)
Asendusmahuti
A (mm)
B (mm)
C (mm)
G
Õhuhulk: soovituslik õhuhulk võimalikult tõhusaks kuivatamiseks

Osad ja tarvikud

Varuosad

MAS_HK_FI_AD_ETS

HK FI AD ETS

11 artikkel

Varuosade komplekt mitmekordselt kasutatava adsorberi jaoks

MAS_HK_FI_AD_SK

HK FI AD SK

2 artikkel

Adsorbent silikageel

Temperatuur max.

120°C

Temperatuur min.

−40°C

Customs tariff number

28112200

Lisatarvikud

MAS_HK_FI_AD_FS

HK FI AD FS

1 artikkel

Ühendusäärik adsorberi jaoks

Materjal

Alumiinium

seal: FKM (FPM)

Ühendus 1

Äärik

Ühendus 2

inner thread
MAS_HK_FI_AD_FS_FILL

HK FI AD FS FILL

1 artikkel

Adsorberi täiteäärik

Materjal

Alumiinium

seal: FKM (FPM)

Paigaldusasend

vertikaalne

Ühendus 1

Äärik

Ühendus 2 + 3

inner thread

Customs tariff number

84219910
MAS_HK_FI_AD_WH

HK FI AD WH

2 artikkel

Wandhalterung für Adsorberfilter

Materjal

Roostevaba teras

PVC

sobilik

for adsorber filter

Ühendus

BSP-sisekeere, silindriline

Customs tariff number

84219910