Mida otsite?

Otsige artiklite, toodete, lahenduste jne alusel...

Meil on kahju!

Otsitulemusi ei leitud.

Sisselogimine

Olete uus klient?

Registreeruge ja teil on palju eeliseid:

Toote olemasolu kontroll
Kiire taastellimine ja tellimuste ajalugu
Isiklikud tootesoovitused
Maksmine arvega

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
KKK

KTF 313

PTFE-Hose, smooth DN12, 3 braid, ST
Inside Ø
12.2 mm
Outside Ø
18.8 mm
Bend radius min.
150 mm
PDF-faili allalaadimine
Detailne teave toote kohta

KTF 313

Inside Ø
12.2 mm
Outside Ø
18.8 mm
Bend radius min.
150 mm
Test pressure
675 bar
Weight per m
0.6 kg
Working pressure 20 °C (stat.)
450 bar
Kõik omadused

Omadused

Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Features
  • smooth inner liner 
Hose material
  • PTFE (Polytetrafluoroethylene) 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Kõik omadused

Tootekirjeldus

Märkused
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Tellimisinfo
Other designs available on request

Product variants

8 Results
Mõõtmejoonis
Nimetus
Внутренний Ø nom. (mm)
Наружный Ø nom. (mm)
Вес на м (kg)
Испытательное давление (bar)
6,2 mm
11,2 mm
0,262 
750 bar
Lisateave
8 mm
13,4 mm
0,345 
712,5 bar
Lisateave
10 mm
15,7 mm
0,442 
712,5 bar
Lisateave
12,2 mm
18,8 mm
0,6 
675 bar
Lisateave
15,1 mm
21,6 mm
0,7 
600 bar
Lisateave
20,2 mm
27,8 mm
1,055 
450 bar
Lisateave
24,2 mm
31,7 mm
1,205 
412,5 bar
Lisateave
31,9 mm
39,3 mm
1,56 
375 bar
Lisateave

Column selection

Внутренний Ø nom. (mm)
Наружный Ø nom. (mm)
Вес на м (kg)
Испытательное давление (bar)
Мин. радиус изгиба (mm)
Продавливающее усилие (bar)
Рабочее давление при 20°C (стат.) (bar)